Thompson Sealer on Stamped Concrete

I am writing this article not to bash Thompsons sealer but it has its place and it is not to reseal stamped concrete. Getting more and more emails about problems associated with homeowners using it over there pure acrylic resin based sealers with plain pure acrylic or stironated acrylic. Will not work.

As a matter of fact once on will not come off with any stripper like Zep degreaser, Are you kidding. Home Depot and Lowe’s to name a couple of big chains sell it continually to customers. Trust me once used game over . You might get lucky once and I get homeowners want to save a buck since it’s hard to find people to reseal properly even those who in some cases install stamped concrete.

We have developed over 33 years of installing and repairing stamped concrete a method of resealing that is foolproof.

I don’t respond to inquiries here since I can not follow all the questions asked through word press and although I have used it for years have no clue how to use it fully since it’s above my pay grade. I digress. I can be contacted at Ted@split-rok.com where I can help if needed. This can be a costly mistake if you do not heed this warning.

Also beware not to use water based sealers over resin based sealers. Resealing it might sound odd but it’s not as easy as it might seem. Use the right product and you get the best results.

Ted@split-rok.com

http://www.split-rok.com/

Advertisements

Inexpensive Stamped Concrete, will cost you later

I am writing this article to make a case for paying a bit more for your Stamped Concrete or other Decorative Products.

We have recently been repairing many bad stamped concrete jobs done by others due to our 30 plus years of experience. Haven’t found many that I can’t repair unless so bad that removal and replacement is the only option.

Low price will generally guarantee poor quality do to cost cutting by the installer to get the job. The sad part is that low strength concrete, lack of proper reinforcing, poor crack prevention due to lack of control cuts, poor coloring process, poor baseĀ and poor sealing application

Sadly the problems don’t show up until the check has cleared or after the first winter freeze when cracks will appear, peeling surface or whitening of sealer. These are but a few issues.

We have recently resealed two of our projects one from 1992 the other from the year 2000 both with no cracks. The one from 1992 even blows me away.

If you were to breakdown the cost over the lifetime of the job and added in the resale appeal I think that even paying $1000 more would be a great investment since stamped concrete will outlast pavers consistently if maintained properly. Resealing in most cases is all that is needed.

Please be advised that after all these years in business that it still amazes me that some Stamped Concrete Contractors have no integrity. It’s not always about the money. You either love doing this or you don’t!

Ted Mechnick

Split-Rok Construction Co.

http://www.split-rok.com

 

 

Rust stains on concrete and elsewhere

20151218_091749FB_IMG_1449440875034Rust stains on concrete that are the result of water from sprinkler systems that are supplied by wells with high Iron content can easily be removed using klenztone that we are factory rep for.

It’s as easy as spraying it on with a inexpensive pump sprayer from home depot. Just spray on and let sit. Not an acid or corrosive liquid. Enviornmentally safe. Works quickly depending on severity of stain.

Cost of removal or cost of a cover up that is topical in nature is only a bandaid. Gone is gone. Works 100% . Works on oil stains as well.

Unfortunately I do not monitor this blog enough due to time constraints, therfore if you are serious about getting your stain out please feel free to call me and I will see to it that you get this amazing product at the best price.

Ted Mechnick 732-915-6391