Thompson Sealer on Stamped Concrete

I am writing this article not to bash Thompsons sealer but it has its place and it is not to reseal stamped concrete. Getting more and more emails about problems associated with homeowners using it over there pure acrylic resin based sealers with plain pure acrylic or stironated acrylic. Will not work.

As a matter of fact once on will not come off with any stripper like Zep degreaser, Are you kidding. Home Depot and Lowe’s to name a couple of big chains sell it continually to customers. Trust me once used game over . You might get lucky once and I get homeowners want to save a buck since it’s hard to find people to reseal properly even those who in some cases install stamped concrete.

We have developed over 33 years of installing and repairing stamped concrete a method of resealing that is foolproof.

I don’t respond to inquiries here since I can not follow all the questions asked through word press and although I have used it for years have no clue how to use it fully since it’s above my pay grade. I digress. I can be contacted at Ted@split-rok.com where I can help if needed. This can be a costly mistake if you do not heed this warning.

Also beware not to use water based sealers over resin based sealers. Resealing it might sound odd but it’s not as easy as it might seem. Use the right product and you get the best results.

Ted@split-rok.com

http://www.split-rok.com/

Concrete- decorative concrete repairs

Split-rok construction owned and operated by Ted Mechnick for over 30 years is now putting a repair package together for contractors interested in repairing all the issues related Stamped Concrete.

It has come to my attention that a lot of bad practices are happening in the industry related poor resealing, poor coloring and in general poor installation. Having seen all issues over my career. I feel it’s time for those like me who have devoted all their efforts in providing only the best product available to step up and learn all the repair tricks I have learned to enhance their bottom line and better support our industry.

Looking for at minimum 6 qualified Stamped Concrete contractors who are interested in signing up to learn what I have over the years and get generated leads from us in your location.

This is a serious opportunity for those who want to learn how to correct your issues and be recognized as I am as a solution guy.

I can be reached at 732-915-6391 for all the details.

Inexpensive Stamped Concrete, will cost you later

I am writing this article to make a case for paying a bit more for your Stamped Concrete or other Decorative Products.

We have recently been repairing many bad stamped concrete jobs done by others due to our 30 plus years of experience. Haven’t found many that I can’t repair unless so bad that removal and replacement is the only option.

Low price will generally guarantee poor quality do to cost cutting by the installer to get the job. The sad part is that low strength concrete, lack of proper reinforcing, poor crack prevention due to lack of control cuts, poor coloring process, poor base and poor sealing application

Sadly the problems don’t show up until the check has cleared or after the first winter freeze when cracks will appear, peeling surface or whitening of sealer. These are but a few issues.

We have recently resealed two of our projects one from 1992 the other from the year 2000 both with no cracks. The one from 1992 even blows me away.

If you were to breakdown the cost over the lifetime of the job and added in the resale appeal I think that even paying $1000 more would be a great investment since stamped concrete will outlast pavers consistently if maintained properly. Resealing in most cases is all that is needed.

Please be advised that after all these years in business that it still amazes me that some Stamped Concrete Contractors have no integrity. It’s not always about the money. You either love doing this or you don’t!

Ted Mechnick

Split-Rok Construction Co.

http://www.split-rok.com

 

 

Choosing concrete contractor

http://www.split-rok.com

http:/www.theconcreteprofessor.com

I just read an article about marketing Decorative Concrete. Interesting to report that we at Split-Rok Construction have been doing all of what was explained for years. I do not want to risk giving away any of my marketing ideas but one item particularly stands out as to why we are recognized as one of the Northeast premier Decorative Concrete Contractors. Attention to detail and artistic ability. I share these two items freely since they incompass passion for what we do that can’t be taught. You either have it or you don’t. I sell many jobs due to people seeing my enthusiasm that  has not wained over 32 years in business. I get as pumped up today as I did when I stamped my first large job atound the pool in my backyard 32 years ago. In my world good is never good enough. Only those who demonstrate a love for what they are doing work here. My men don’t just show up for a paycheck. They show up to be part of creating something that when they are done they can be proud of what they accomplished. I had a contractor call me yesterday referred to me by my concrete supplier Clayton Concrete. He was a new guy in business that had three small projects spread out around New Jersey. The conversation took me back to when i started Split-Rok Consruction 8/6/1985. I was quoting him prices which shocked him. His comment to me when I stated that I’m paid for my ability to install almost perfect stamped concrete. Next question was would it be less expensive if it weren’t so perfect It took my breath away to think that someone would do a substandard job just to make more money. He said that if he paid me what what I wanted he wouldn’t make any money. As far I’m concerned this is not only about the money. We talked a bit more and due to me saying repeatedly that I’m all about detail cost what it may to him,I would not compromise my integrity for any amount of money. My major pointbin writing tjis article like others is to better inform people today of what to be on guard for when chosing the right person for the job. Here’s wha mayt seem.a crazy question to ask your potential Stamped Concrete Contractor. ” How many jobs have you had to remove?” My point is after all my years in business I’ve had to remove a few due to not meeting my standard of excellencd or poor material being delivered. This is why I use Clayton Concrete exclusively. Their standards are at the same level as my standards. One time when i was in business about 5 or 6 years hired a guy who said he knew how to powerwash. I believed him and sent him to wash off an $8,000 job in Rumson that i was extremely proud of the way it turned out. Mult-colored someting we pride ourselves in due to us refusing to use anything but L.M.Scofield color hardener on all stamped concrete we install. Well I sent him to the job confident that he told me the truth that he knew how to powewash. Seemed at the time to be a no brainer. Connect hose start powerwasher,wash and come back next day and seal. Unfortunately no. He had used the wrong tip on the pressure washer and I got a call from the homeowner a very detail oriented person who said Ted you have to come take a look at this job. You can bet my heart dropped in anticipation of what the matter was. Upon my arrival I walked to the of the house where the stamped raised patio was installed to see Nancy ( I will never forget her and her standing there arms folded) say look at this mess. My guy had destoyed my hard work in an hour. “Ted what are you going to do about this?” As I searched my mind for an easy solution acceptable to me and my client the words left my mouth coupled with emotional pain. I will remove it immediately and redo it. Her arms unfolded and although not happy about having to go through that process again my reputation was saved. Cost in excess of $8,000. I can still feel the pain looking back. My integrity was saved. One of my most prized posessions. My point is that anyone who is great at this business has had to remove a few jobs. Those that haven’t in my opinion are not good stamped concrete contractors. I feel asking that one question alone will vet out the bad from the good contractor. Price only should never be your main concern, since over the lifetime of a great job you can be proud of the and sting of paying a bit more wanes. We pay strict attention to detail always. Some minor imperfections may show up once washed but can easily be repaired since years if experience have taught me how to fix them and since I the owner of Split-Rok Construction inspect and oversee all projects big and small you can be assured that you’ll get whatyou paid for. Excellence! I test and check all materials and watch each man to see that he carries out his assigned task. I’ll do a great job. What more could you ask? Ted Mechnick owner of Split-Rok Construction for 32 years. ACI specifications always met and exceeded.

732-915-6391 my personal cell phone number.

 

 

 

Grinding, staining existing concrete floors

We have been grinding and dying existing concrete floors for many businesses here in New Jersey.

The cost to do this is considerably less then tile since it costs about $12-$25 per square foot for tile installation.

We can generally grind,dye and water base epoxy coat for about $9 per square foot depending on condition of floor.

Maintenance is easy since all it takes is waxing to maintain. Great cost effective solution and can be dyed to achieve an artistic look unique to your business.

We can be reached at www.split-rok.com or email at Ted@split-rok.com

Call us for a quote at 732-899-6391

 

Rust stains on concrete and elsewhere

20151218_091749FB_IMG_1449440875034Rust stains on concrete that are the result of water from sprinkler systems that are supplied by wells with high Iron content can easily be removed using klenztone that we are factory rep for.

It’s as easy as spraying it on with a inexpensive pump sprayer from home depot. Just spray on and let sit. Not an acid or corrosive liquid. Enviornmentally safe. Works quickly depending on severity of stain.

Cost of removal or cost of a cover up that is topical in nature is only a bandaid. Gone is gone. Works 100% . Works on oil stains as well.

Unfortunately I do not monitor this blog enough due to time constraints, therfore if you are serious about getting your stain out please feel free to call me and I will see to it that you get this amazing product at the best price.

Ted Mechnick 732-915-6391